Advanced Keys AK-104 Installation Guide Page 15

  • Download
  • Add to my manuals
  • Print
  • Page
    / 15
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 14
15
© Copyright Advanced Keys Inc. 2013. All Rights Reserved.
Controller operating voltage range: …………………...………….…...……………… 10 VDC16 VDC
Controller Stand by power: …………………………………………………………... 20mA @ 12 VDC
Avg. controller operating power: …………….………………………………………… ≤ 80mA@12VDC
Devices operating temperature range: ……….………………………………………… -25°C +85°C
Push Button Diameter: …………………………………………………………………………….…40mm
Push Button Dimensions: ……..…………………………………………… 76mmL x 40mmW x 40mmH
Base Controller Dimensions: ……………………...……………….………115mmL x 90mmW x 30mmH
Installer of this system to is requested to fill out the following information as a proof of installation to
the end-user of this system. For manufacture warranty to take immediate effect please request the
end-user to update the following information at: http://www.advancedkeys.com/registration.htm
Connecting the wire harnesses and power ON the controller, check and confirm system operations
(Refer to Ignition Test and Troubleshooting) verify functions of the vehicle are in working order.
Make sure all wiring connection are insulated properly. Place and secure control units to locations
inside trim panels and bundle all lose wiring. Put back all trim panels
When mounting the controller unit in the vehicle, consider the location carefully. You should make
sure that you avoid any location where the controller is exposed to moisture, extreme heat or
interfere with moving parts on the vehicle which hampers driving.
Explain all functions related to the end-user of this system.
REFERENCES INFORMATION
PRODUCT SPECIFICATIONS
PRODUCT REGISTRATION
Company / Installer Name:
Phone Number:
Installer Address:
Date
of Installation:
Vehicle Manufacture
:
Model:
Year:
Interface/Bypass Module Used:
If YES specify bypass make/model/firmware version:
Steering Column
Lock Bypassed:
If YES specify bypass method used:
System
Ignition Mode:
System
Enabled by:
Reviewed Product Operation with End
-User:
Remote
Start Function Enabled:
If YES is Neutral Safety Switch tested
and working?
Additional Comments:
YES NO YES NO
YES NO
Tested and Working Not Tested
Tach Tachless
Smart Key Third Part Device
YES NO
Page view 14
1 2 ... 10 11 12 13 14 15

Comments to this Manuals

No comments