Advanced Keys AK-104 User Manual Page 5

  • Download
  • Add to my manuals
  • Print
  • Page
    / 7
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 4
5
© Copyright Advanced Keys Inc. 2013. All Rights Reserved.
REMOTE FUNCTIONS DESCRIPTION
1. Proximity Unlock / Disarm
Approach the vehicle and when Smart Key enters the sensing range, system will disarm and unlock
the doors immediately. Parking lights and horn/siren (if enabled) will flash and sound 2x. The status
indicator light will flash BLUE to indicate system is disarmed.
2. Proximity Lock / Arm
Walk away from the vehicle and after Smart Key exits the sensing range, system will arm and lock the
doors immediately. Parking lights and horn/siren (if enabled) will flash 3x and sound 1x. The status
indicator light will flash BLUE and RED alternatingly to indicate system is armed.
3. Remote Unlock / Disarm
Press and hold the UNLOCK for 1 second to manually disarm and unlock the doors. Parking lights
will begin to flash, indicating the lock delay function is active. See Door Lock Delay Function under the
System Functions description for more info.
4. Remote Lock / Arm
While Smart Key is outside the proximity sensing range: Press and hold the LOCK for 1 second to
manually lock the doors and arm the vehicle.
While Smart Key is inside the proximity sensing range: Press and hold the LOCK for 3 seconds to
overwrite Smart Key function and manually lock the doors. Caution: Doors will not be opened until Smart
Key exit and re-enter the sensing range, do not leave smart keys inside vehicle when closing doors.
5. Bypass Transponder Card Unlock / Disarm
Bypass Transponder Cards (or bypass cards) provide an alternative method to gain access and
starting the vehicle. It’s useful in the event when Smart Key became lost, damaged, battery depleted,
submerged in liquid, interfered by strong electromagnetic or any other instance that the system failed
to identify the Smart Key.
Place one of the bypass card next to the bypass antenna for 5 seconds to disarm, unlock doors and
enable the Push-Start Ignition system (if installed). Once the bypass card is removed from the bypass
antenna, system will lock and arm after 10 seconds. User must enter and start the vehicle within this
10-second window to avoid trip alarm function. If longer disarm time is required; leave the bypass card
over the bypass antenna to disarm continuously.
6. Remote Trunk Release
To release trunk, press and hold the UNLOCK for 3 seconds. Please note the system will unlock
and disarm the vehicle before release the trunk. Make sure to arm and close the trunk when done.
7. Panic Function
While the Smart Key is outside the proximity sensing range; press and hold the LOCK for 3
seconds to activate Panic Function. Parking lights will flash and horn/siren (if function enabled) will
sound for 30 seconds. If the vehicle was remotely started, the engine will shutdown immediately.
Press LOCK or UNLOCK to exit the Panic Function.
8. Remote Start (Optional AK-PSBXX series Push-Start Ignition Module Installed)
While the Smart Key is outside the proximity sensing range; press and hold the REMOTE START
for 3 seconds. The parking lights will flash once to indicate remote start signal received. After 5
seconds delay, the Push-Start Ignition system will attempt to start the engine. If your vehicle does not
start at the first attempt (i.e. Cold engine start) it will attempt to start the engine up to three times.
Remote start session will last 15-minutes and parking lights and will remain ON during this period.
Note: Press and hold the REMOTE START for 3 seconds to shutdown the remote start. For diesel vehicle there
will be a delay if the vehicle’s Wait-to-Start Light is ON. After 18 seconds expires, system will proceed to start the
engine regardless.
9. Remote Start Ignition Take Over
After vehicle is remote started, use the follow steps to takeover ignition without restarting the engine:
1. Approach the running vehicle with a valid Smart Key to disarm and unlock doors.
2. Enter the vehicle and without stepping on the brake, press the Push-Start button once.
3. Step on the brake to exit Remote Start mode. (Push Start Button’s status LED turns OFF and
backlight stays ON) Vehicle is now safe to take out of the Park to drive.
Page view 4
1 2 3 4 5 6 7

Comments to this Manuals

No comments